For the CX 500 in particular:

• This is suitable to convert the CDI bike to a 12V coil system.
  • Use OEM 12V coils or aftermarket 2-4 ohm coils
  • Dwell is between 4 – 6 ms – nominally 4.5 – 5 ms providing plenty of spark energy.
  • Easier starting and less stress on the engine
  • Simple mounting and connection
  • Provides selectable Advacne curves (4)
  • Provides Diagnostic LEDs
  • Automatic Shutoff to protect coils
• There is no Ignition Kill wire interface – A Relay needs to be used on the kill switch wire to switch the power to the ignition
  • Supply your own or
  • Order with 12V 40A relay wired ready to go.